1. Manual De Instrucciones Dela Lavadora Aspes Ideal La- 143

INSTRUCTION AND MAINTENANCE BOOKLET

This Site is Inactive This site has been marked as inactive because no members have logged in recently. Sep 4, 2017 - Manual De Instrucciones Dela Lavadora Aspes Ideal La- 143 Lavadora. Coccion La compra directa en cada. Manual de instrucciones ASPES. Dec 27, 2017 - Manual De Instrucciones Dela Lavadora Aspes Ideal La- 143 Lavadora. Libro de instrucciones, guia del usuario, manual de servicio,.

26

ENGLISH

Getting to know your washing machine

Before doing anything else you should get to know your washing machine perfectly. To help you recognise all the different devices and elements which your machine is equipped with, we have included some diagrams. These can be found at the back of the BOOKLET, inside the back cover.

Please study them carefully. They win help you to understand the text and to visually locate all the elements which make up your machine.

Preliminary warnings

Installation

Moreover, for the same reason, some models have a patented system by means of which the drum turns faster than normal for a short amount of time (2 seconds) only in the wash programmes for normal fabrics (cotton, linen, etc.). This occurs between six and eight times during the whole wash.

Description of your washing machine

(Figure 1)

1.- Top.

2.- Loading door.

3.- Handle.

4.- Exterior door (depending on model).

5.- Plinth (depending on model).

It is essential that the installation of your WASHING MACHINE be carried out in accordance with current standards.

Specific installation instructions can be found in the INSTALLATION MANUAL.

Before starting your washing machine, it is absolutely essential to remove the INTERNAL FIXING SCREWS, used for transit. To do this, consult the installation manual.

Technical specifications table

Stuck to the back of your WASHING MACHINE, you will find a TECHNICAL SPECIFICATIONS TABLE, which gives the technical and identification information for your machine. THIS LABEL SHOULD BE CONSULTED BEFORE MAKING ANY ELECTRICAL CONNECTIONS.

In order to preserve the environment, your washing machine is equipped with a system which is capable of adapting to different conditions of use (amount of clothes and type of fabric), thereby ensuring an optimum level of water and power with the same wash and rinse results. This means that during the washing process, the amount of water you observe through the hatch may seem low.

Control panel (Figure 2)

6.- Programme selector control knob.

7.- Wash temperature selector control knob.

8.- Additional function buttons.

9.- Detergent dispenser.

10.- «ON» light.

11.- Spin speed selector dial.

Using the selector controls

•

Programme selector control

You can use this control to select the Wash Programme you require. Turn the control knob clockwise. Until the indicator coincides with the number of the programme required. NEVER TRY TO FORCE THE KNOB in the opposite direction.

Use this control to select the wash temperature you require. Turn it gently until the number corresponding to the temperature required coincides with the indicator.

If you want to wash with cold water, turn the

Whith this dial, you can choose the spin speed. To do this turn dial until the speed printed on the dial coincides with the printed sign on the machine.

Stop/start button

Once you have selected programme you require, press-thisbutton to start your washing machine. The «ON» light will come on after a few seconds, during which time the door. Safety device is activated.

If the programme is completed without interruptions, you can open the loading door once the programme is over and you have waited for the door locking safety device to be deactivated (about 2 minutes). The «ON» light will go off indicate this.

When your washing machine is in operation, the wash cycle can be interrupted by pressing the stop/start button. The «ON» light will go off. Press the stop/start button again, to start your washing machine from the phase of the cycle where it left off. If you stop your machine to add or remove garments, make sure that the water level is not so high that it could overflow when the door is opened. Also make sure that the temperature inside the drum is not too high. Remember that even though the «ON» light goes off, you have to wait about two minutes until the door safety device is deactivated before you can open the door.

Additional funtion buttons

By pressing these buttons you can include a series of additional functions and features in the wash programme you have selected. These functions and features will enable you to adjust the wash to your particular needs and requirements.

Depending on the model, your washing machine will have some of the following funtions.

No spin button

Press this button to eliminate the spin phase from any programme selected. This

Press this button to reduce spin speed. This function is specially recommended for washing clothes which are very wom or have a special finish.

Creaseguard button

Pres this button to interrupt the last rinse and hold the clothes immersed in water inside the drum to avoid creasing. Press the button again to complete the programme. Or select the drain-onlyprogramme to avoid the spin cycle.

Extra rinse button

Press this button to increase the final rinse. This increases water consumption.

Cold wash button

Press this button to select a cold wash programme.

1/2

Load button

In the models which do not have the automatic variable capacity feature, press this button to save water by reducing consumption when washing small loads.

Loading the machine

Opening the door

In order to open the door, pull outwards on the handle (Figure 1-3)

Loading the drum

When loading clothes into the drum, you should bear the following points in mind:

—Make sure all the pockets are empty.

—Stretch out and unfold each item.

—Put the items into the drum one by one, so that they do not get tangled up together.

—Take into account the recommended load size for each programme.

—When washing towels, try not to wash them on their own. Mix them in with other clothes.

Once you have loaded the drum, close the door by pressing on it until it is properly closed. Make sure that no clothes get trapped between the door and the rubber seal.

Adding detergent and additives

Before starting the wash programme, add the detergent or additive to the detergent dispenser (Figure 3).

Depending on the model, the detergent dispenser in your washing machine has three or four compartments marked with the following symbols.

compartment:

For the PREWASH detergent. compartment:

For the MAIN WASH detergent.

compartment:

For additives like starch, fabric conditioner, etc., if required.

CI compartment:

(Optional) For liquid whiteners: bleach, etc., if required.

Note: The level of liquid should never exceed the MAX LEVEL (Figure 3).

Optional dispenser

You can also use liquid detergent in your washing machine. To do this you need the optional dispenser which you can obtain

through the FAGOR SERVICE NETWORK. This optional dispenser should be placed in theCOMPARTMENT of the detergent dispenser (Figure3-A).Always use the amout recommended by the detergent manufacturer. However, the detergent should never go above the MAX level marked on the side of the dispenser.

Detergent

Only use detergents suitable for automatic washing machines good quality detergents which do not produce too much lather. When washing woollen garments, only use neutral detergents.

Detergent guide

Remenber that the amount of detergent to be used always depends on:

—The size of the load.

—The type of clothes to be washed.

—How dirty the clothes are.

—The hardness of the water.

Using more detergent than necessary will not improve the results of your wash. In addition to being a waste it will also have negative effects on the environment.

For wash programmes without a prewash, it is best to use detergents which can be put straight in the drum. In any case, we recommend that you follow the instructions of the manufacturer of the detergent used.

The following table will help you to determine the amount of detergent to be used, depending on the hardness of the water and the size of the load.

ENGLISH

Information about water hardness can be obtained from your local authority. If your water hardness is measured in german measures, divide the hardness values given above by 1.78.

Selecting the wash programme

Your washing machine offers you a wide range of programmes which will enable you to wash all types of clothing.

It has 2 types of PROGRAMME:

1.- NORMAL WASH PROGRAMMES, for resistant fabrics.

2.- DELICATE WASH PROGRAMMES, for delicate fabrics.

The wash systems included in your washing machine are ideal for washing both cotton and synthetic garments, as well as woollen, silk or acrylic garments.

Basically, what varies between PROGRAMMES is the drum rotation speed, temperature, wash time and water level.

In general, the NORMAL, cycles are best for washing resistant fabrics like cotton, resistant synthetics, linen, etc., whilst the DELICATE cycles, with slower drum rota-

tion speeds, lower temperature and higher water levels, are for synthetic fabrics, wool, silk, etc.

The models which have the wash temperature selector control have an automatic variable load control feature, which automatically adjusts the consumption of water and electricity to the a quantity of clothes to be washed.

Programme tables

There follows a number of detailed PROGRAMME TABLES. Please consult them, as they will provide you with information about the different wash programmes which your washing machine offers.

An abbreviated version of the table can be found on the front or top panel of the detergent dispenser, or on a card included in the documentation bag.

Delicate wash programmes:

Delicate synthetic fabrics, mixed fabrics, etc. Maximum recommended load: 2,5/3 kg. (half of the maximum washing machine load)

Guide for washing machines with 13 programmes

Normal wash programmes:

(*) Energy label data based on this programme, in accordance with EN60456.

Cleaning your washing machine before

It is advisable to clean the inside of your washing machine before using it for the first time, in order to get rid of any lubricants or water left over from testing. To do this you should:

Important: In order to avoid burns, this operation should not be carried out when the wash water temperature is over 30ºC.

Starting your machine

— Put a measure of detergent into the COMPARTMENT of the DETER-

GENT DISPENSER.

—Select WASH PROGRAMME «2» (90º without prewash) with the programme selector control knob.

—Start the washing machine.

—Wait until the PROGRAMME finishes.

When starting your washing machine, carefully follow all the steps explained below:

1.- Check that the washing machine is plugged in and that the power is turned on.

2.- Turn on the tap or open the stopcock.

3.- Put the clothes into the DRUM.

4.- Close the LOADING DOOR properly.

5.- Put the required amount of detergent into the DETERGENT DISPENSER.

Cleaning and special care

(Fig. 6)

Clean the accessible filter whenever the drainage pump is blocked by foreign bodies.

a)Loosen the base by gently pulling on the sides and turning downwards. Then undo the fasteners.

If there is no side access, introduce a small screwdriver in the three slots on the upper part of the base, in order to lever it and loosen the hooks.

b)Use a plate or other container under the filter to collect the water that will be released when it is loosened.

c)Turn the filter a quarteror halfway sideways towards the left. Water will start to come out.

d)When you are finished taking the water out of the washing machine, turn the filter around several times until you can take it out fully.

e)Remove any objects or fluff that may be

in the filter.

f ) Replace the filter and the base in their places.

6.- Select the PROGRAMME you require with the PROGRAMME SELECTOR control knob.

7.- Select the wash temperature with the TEMPERATURE SELECTOR control knob.

8.- Select the required spin speed with the SPIN SPEED SELECTOR DIAL.

9.- Select any special functions you require by pressing the corresponding buttons.

10.- Press the STOP/START button. The «ON» light will come on. The wash programme selected will now begin.

End of programme

When the programme selector control knob reaches the STOP POSITION, this means that the programme has finished.

DO NOT OPEN THE DOOR OF YOUR WASHING MACHINE UNTIL THE DOOR SAFETY DEVICE IS DEACTIVATED.

Press the STOP/STAR button.

INSTRUCTION AND MAINTENANCE BOOKLET

26

ENGLISH

Getting to know your washing machine

Before doing anything else you should get to know your washing machine perfectly. To help you recognise all the different devices and elements which your machine is equipped with, we have included some diagrams. These can be found at the back of the BOOKLET, inside the back cover.

Please study them carefully. They win help you to understand the text and to visually locate all the elements which make up your machine.

Preliminary warnings

Installation

Moreover, for the same reason, some models have a patented system by means of which the drum turns faster than normal for a short amount of time (2 seconds) only in the wash programmes for normal fabrics (cotton, linen, etc.). This occurs between six and eight times during the whole wash.

Description of your washing machine

(Figure 1)

1.- Top.

2.- Loading door.

3.- Handle.

4.- Exterior door (depending on model).

5.- Plinth (depending on model).

It is essential that the installation of your WASHING MACHINE be carried out in accordance with current standards.

Specific installation instructions can be found in the INSTALLATION MANUAL.

Before starting your washing machine, it is absolutely essential to remove the INTERNAL FIXING SCREWS, used for transit. To do this, consult the installation manual.

Technical specifications table

Stuck to the back of your WASHING MACHINE, you will find a TECHNICAL SPECIFICATIONS TABLE, which gives the technical and identification information for your machine. THIS LABEL SHOULD BE CONSULTED BEFORE MAKING ANY ELECTRICAL CONNECTIONS.

In order to preserve the environment, your washing machine is equipped with a system which is capable of adapting to different conditions of use (amount of clothes and type of fabric), thereby ensuring an optimum level of water and power with the same wash and rinse results. This means that during the washing process, the amount of water you observe through the hatch may seem low.

Control panel (Figure 2)

Manual De Instrucciones Dela Lavadora Aspes Ideal La- 143

6.- Programme selector control knob.

7.- Wash temperature selector control knob.

8.- Additional function buttons.

9.- Detergent dispenser.

10.- «ON» light.

11.- Spin speed selector dial.

Using the selector controls

•

Programme selector control

You can use this control to select the Wash Programme you require. Turn the control knob clockwise. Until the indicator coincides with the number of the programme required. NEVER TRY TO FORCE THE KNOB in the opposite direction.

Use this control to select the wash temperature you require. Turn it gently until the number corresponding to the temperature required coincides with the indicator.

If you want to wash with cold water, turn the

Whith this dial, you can choose the spin speed. To do this turn dial until the speed printed on the dial coincides with the printed sign on the machine.

Stop/start button

Once you have selected programme you require, press-thisbutton to start your washing machine. The «ON» light will come on after a few seconds, during which time the door. Safety device is activated.

If the programme is completed without interruptions, you can open the loading door once the programme is over and you have waited for the door locking safety device to be deactivated (about 2 minutes). The «ON» light will go off indicate this.

When your washing machine is in operation, the wash cycle can be interrupted by pressing the stop/start button. The «ON» light will go off. Press the stop/start button again, to start your washing machine from the phase of the cycle where it left off. If you stop your machine to add or remove garments, make sure that the water level is not so high that it could overflow when the door is opened. Also make sure that the temperature inside the drum is not too high. Remember that even though the «ON» light goes off, you have to wait about two minutes until the door safety device is deactivated before you can open the door.

Additional funtion buttons

By pressing these buttons you can include a series of additional functions and features in the wash programme you have selected. These functions and features will enable you to adjust the wash to your particular needs and requirements.

Depending on the model, your washing machine will have some of the following funtions.

No spin button

Press this button to eliminate the spin phase from any programme selected. This

Press this button to reduce spin speed. This function is specially recommended for washing clothes which are very wom or have a special finish.

Creaseguard button

Pres this button to interrupt the last rinse and hold the clothes immersed in water inside the drum to avoid creasing. Press the button again to complete the programme. Or select the drain-onlyprogramme to avoid the spin cycle.

Extra rinse button

Press this button to increase the final rinse. This increases water consumption.

Cold wash button

Press this button to select a cold wash programme.

1/2

Load button

In the models which do not have the automatic variable capacity feature, press this button to save water by reducing consumption when washing small loads.

Loading the machine

Opening the door

In order to open the door, pull outwards on the handle (Figure 1-3)

Loading the drum

When loading clothes into the drum, you should bear the following points in mind:

—Make sure all the pockets are empty.

—Stretch out and unfold each item.

—Put the items into the drum one by one, so that they do not get tangled up together.

—Take into account the recommended load size for each programme.

—When washing towels, try not to wash them on their own. Mix them in with other clothes.

Once you have loaded the drum, close the door by pressing on it until it is properly closed. Make sure that no clothes get trapped between the door and the rubber seal.

Adding detergent and additives

Before starting the wash programme, add the detergent or additive to the detergent dispenser (Figure 3).

Depending on the model, the detergent dispenser in your washing machine has three or four compartments marked with the following symbols.

compartment:

For the PREWASH detergent. compartment:

For the MAIN WASH detergent.

compartment:

For additives like starch, fabric conditioner, etc., if required.

CI compartment:

(Optional) For liquid whiteners: bleach, etc., if required.

Note: The level of liquid should never exceed the MAX LEVEL (Figure 3).

Optional dispenser

You can also use liquid detergent in your washing machine. To do this you need the optional dispenser which you can obtain

through the FAGOR SERVICE NETWORK. This optional dispenser should be placed in theCOMPARTMENT of the detergent dispenser (Figure3-A).Always use the amout recommended by the detergent manufacturer. However, the detergent should never go above the MAX level marked on the side of the dispenser.

Detergent

Only use detergents suitable for automatic washing machines good quality detergents which do not produce too much lather. When washing woollen garments, only use neutral detergents.

Detergent guide

Remenber that the amount of detergent to be used always depends on:

—The size of the load.

—The type of clothes to be washed.

—How dirty the clothes are.

—The hardness of the water.

Using more detergent than necessary will not improve the results of your wash. In addition to being a waste it will also have negative effects on the environment.

For wash programmes without a prewash, it is best to use detergents which can be put straight in the drum. In any case, we recommend that you follow the instructions of the manufacturer of the detergent used.

The following table will help you to determine the amount of detergent to be used, depending on the hardness of the water and the size of the load.

ENGLISH

Information about water hardness can be obtained from your local authority. If your water hardness is measured in german measures, divide the hardness values given above by 1.78.

Selecting the wash programme

Your washing machine offers you a wide range of programmes which will enable you to wash all types of clothing.

It has 2 types of PROGRAMME:

1.- NORMAL WASH PROGRAMMES, for resistant fabrics.

2.- DELICATE WASH PROGRAMMES, for delicate fabrics.

The wash systems included in your washing machine are ideal for washing both cotton and synthetic garments, as well as woollen, silk or acrylic garments.

Basically, what varies between PROGRAMMES is the drum rotation speed, temperature, wash time and water level.

In general, the NORMAL, cycles are best for washing resistant fabrics like cotton, resistant synthetics, linen, etc., whilst the DELICATE cycles, with slower drum rota-

tion speeds, lower temperature and higher water levels, are for synthetic fabrics, wool, silk, etc.

The models which have the wash temperature selector control have an automatic variable load control feature, which automatically adjusts the consumption of water and electricity to the a quantity of clothes to be washed.

Programme tables

There follows a number of detailed PROGRAMME TABLES. Please consult them, as they will provide you with information about the different wash programmes which your washing machine offers.

An abbreviated version of the table can be found on the front or top panel of the detergent dispenser, or on a card included in the documentation bag.

Delicate wash programmes:

Delicate synthetic fabrics, mixed fabrics, etc. Maximum recommended load: 2,5/3 kg. (half of the maximum washing machine load)

Guide for washing machines with 13 programmes

Normal wash programmes:

(*) Energy label data based on this programme, in accordance with EN60456.

Cleaning your washing machine before

It is advisable to clean the inside of your washing machine before using it for the first time, in order to get rid of any lubricants or water left over from testing. To do this you should:

Important: In order to avoid burns, this operation should not be carried out when the wash water temperature is over 30ºC.

Starting your machine

— Put a measure of detergent into the COMPARTMENT of the DETER-

GENT DISPENSER.

—Select WASH PROGRAMME «2» (90º without prewash) with the programme selector control knob.

—Start the washing machine.

—Wait until the PROGRAMME finishes.

When starting your washing machine, carefully follow all the steps explained below:

1.- Check that the washing machine is plugged in and that the power is turned on.

2.- Turn on the tap or open the stopcock.

3.- Put the clothes into the DRUM.

4.- Close the LOADING DOOR properly.

5.- Put the required amount of detergent into the DETERGENT DISPENSER.

Cleaning and special care

(Fig. 6)

Clean the accessible filter whenever the drainage pump is blocked by foreign bodies.

a)Loosen the base by gently pulling on the sides and turning downwards. Then undo the fasteners.

If there is no side access, introduce a small screwdriver in the three slots on the upper part of the base, in order to lever it and loosen the hooks.

b)Use a plate or other container under the filter to collect the water that will be released when it is loosened.

c)Turn the filter a quarteror halfway sideways towards the left. Water will start to come out.

d)When you are finished taking the water out of the washing machine, turn the filter around several times until you can take it out fully.

e)Remove any objects or fluff that may be

in the filter.

f ) Replace the filter and the base in their places.

6.- Select the PROGRAMME you require with the PROGRAMME SELECTOR control knob.

7.- Select the wash temperature with the TEMPERATURE SELECTOR control knob.

8.- Select the required spin speed with the SPIN SPEED SELECTOR DIAL.

9.- Select any special functions you require by pressing the corresponding buttons.

10.- Press the STOP/START button. The «ON» light will come on. The wash programme selected will now begin.

End of programme

When the programme selector control knob reaches the STOP POSITION, this means that the programme has finished.

DO NOT OPEN THE DOOR OF YOUR WASHING MACHINE UNTIL THE DOOR SAFETY DEVICE IS DEACTIVATED.

Press the STOP/STAR button.